ISO files have been generated successfully This is how simple it is to make bootable Windows 10 USB Mac with the help of this tool. Select 'USB Flash Drive' Once done, click on OK on the pop-up window. Create WinPE 5 (Windows 10) x64 boot disk (New)Click on USB Flash Drive from the main interface and then on Burn. 5 Troubleshooting post installation problemsSome computers will not recognize the usb drive or a cd as a bootable device if it has the x86 version. When the Install MacOS High Sierra is copied, attached your USB Flash Drive.A mini-displayport to VGA adapter, or a HDMI cable Image: Apple You bought that shiny new MacBook Pro or iMac, and you're ready to start working.The recommended configuration of a workshop server is:These instructions have been tested on the following models:When you have Linux running, you can determine your model using sudo dmidecode -s system-product-nameFor more information on the different models of Mac Mini see: 1.1 Mac Mini versionsWith the help of a GUI, Jack Wallen shows you how to create a handy flash drive for macOS. This is the most powerful server we have found for its size, especially considering that the PSU is internal.
![]() Img.dmgSudo dd if=ubuntu-12.04.3-server-amd64.img.dmg of=/dev/rdiskN bs=1mInsert the CD-ROM or flash disk into the Mac Mini, and connect the keyboard and screen. /dev/disk2Sudo dd if=ubuntu-14.04-server-amd64.iso of=/dev/rdiskN bs=1mTo install older versions of Ubuntu you need to use a Mac which is running OSX and follow these instructions hdiutil convert -format UDRW -o ubuntu-12.04.3-server-amd64.img ubuntu-12.04.3-server-amd64.iso# Note: the output filename may be. To do this on a Mac running OSX: diskutil list # note the devices seenDiskutil list # note the new device seen, e.g. Start with the standard 64-bit server edition (ubuntu-14.04-server-amd64.iso) which should work fine with recent Mac Minis.If you have problems booting, then try one of the amd64+mac 1 variants from the alternative downloads page:You may burn the image onto a CD-R if you have a USB CD-ROM drive to boot from, such as the Apple Superdrive.To write the image to a USB stick you can simply dd it. 2 Preparing the install imageFirst you need to choose which ISO image to use and download it. This leaves the internal gigabit Ethernet port available for the lab internal network and avoids having to trunk VLANs it also helps if you have a newer Mac Mini where the internal ethernet adapter is not supported in the default kernel. ![]() Guided - use entire disk and set up LVM If you see a screen that the install has detected a mounted partition select Yes to unmount the partition before continuing. If you are going to be travelling around the world you should not accept the local timezone, and instead scroll down to "UTC" at the very end of the worldwide list. Using mac mini for video editingSoftware to install: select only "OpenSSH server". No automatic updates (you don't want changes in the middle of a workshop) If not, leave this blank, and packages will be fetched over the Internet. Use HTTP proxy? Check with your instructors whether there is a local cache you should use to speed up installation. Amount of volume group to use for guided partitioning: 50G (This will give about 31G root and 16G swap, but these are easy to grow later if required)The partitioning generated should look something like this: LVM VG hostname-vg, LV root as ext4Partition #1 of SCSI1 (0,0,0) (sda) as EFIbootPartition #2 of SCSI1 (0,0,0) (sda) as ext2 "Write changes to disk and configure LVM?" Yes Prepare A Flashdrive In For Windows Boot Free Should IncreaseAlternatively# lvcreate -size 300G -stripes 2 -stripesize 4096 -name data -vgTo see which physical volume(s) each logical volume is using: # lvs -a -o +devices# lvs -a -o name,lv_size,devices 4.2 Optimise the swap volumeYou can move the swap volume to the second disk, which helps balance the usage slightly. Choosing a large stripe size ensures that smaller reads and writes hit only a single disk. By creating a "striped" volume, half of the extents will be on each disk this increases performance by dividing the read and write load between the disks. It helps when locating the machine without a monitor.Since all the following commands need to be done as root, get a root shell: $ sudo -sThe second hard drive can now be made available for storing data.The simplest way to do this is to make the whole second drive an LVM physical volume, and add it to our volume group.First, check your current volume group name: # vgsLook under the first column "VG": if it was created by the Ubuntu installer it will be something like " -vg".Label your second drive as a physical volume, and add it to the volume group: # pvcreate /dev/sdbNow check your work: # pvs # should show both /dev/sda3 and /dev/sdb as physical volumes# vgs # The "#PV" (number of physical volumes) and VSize/VFree should increaseAlternatively you could choose to partition it in the same way as the first drive, and it might be possible to boot off this drive if the first one fails - but you'd almost certainly have lost your OS installation anyway.Now let's create a new logical volume and mount it under /data. Then you no longer need the keyboard and monitor.Hint: also take a note of the MAC address of the USB-ethernet adapter, and label it. # swapoff -aWARNING: Reducing active logical volume to 4.00 GiBTHIS MAY DESTROY YOUR DATA (filesystem etc.)Do you really want to reduce swap_1? : yReducing logical volume swap_1 to 4.00 GiBLogical volume swap_1 successfully resizedFinally enable the swap partitions again # swapon -a# free # should have 4GB of swap space 4.3 Configure the internal network interfaceWe purposely did not configure our network interfaces during installation so that the installation would go faster and we could configure out interfaces as we want now. If you don't intend to use hibernate functionality you can reduce it to (say) 4GB, as you never want your machine to go this far into swap anyway. By default a 16GB RAM system will have a 16GB swap volume. 4.4 Update all packagesNow that our base operating system is installed we need to pull down a list of current versions of available packages and then download and install the packages.Let's first see what version of the Linux kernel we are running: $ uname -aRemember this and see if you have a newer kernel version once we are finished with this exercise. Trying pinging some external sites to verify that your network is working.
0 Comments
Leave a Reply. |
AuthorHector ArchivesCategories |